论文标题

Lynx光栅光谱仪设计:优化搅动的传输光栅

Lynx grating spectrometer design: Optimizing chirped transmission gratings

论文作者

Günther, Hans Moritz, Heilmann, Ralf K.

论文摘要

Lynx是NASA 2020年际调查的四个大型墨西哥概念研究之一。设计参考任务包括基于关键角传输(CAT)光栅的X射线光栅光谱仪(XGS)。过去,我们使用传统的扁平猫光栅研究了不同的光栅尺寸和布置,并具有恒定的条间距。但是,新技术开发带来了刺耳的光栅。使用光栅杆间距在光栅上有所不同的光栅,使我们能够用更大的光栅填充光圈,因为呼叫可以补偿由于大型扁平光栅与罗兰圆环的偏离而造成的一些畸变。这可以通过光栅支撑结构阻塞的区域减少。使用较大的光栅也可以节省潜在的成本。我们使用射线追踪研究XGS设计,并使用嘶哑的光栅研究,发现使用80 * 160美元$毫米的chir光栅使我们能够将光栅的数量从几千减少到几百个,同时将有效面积增加25%并保持解决功率恒定。弯曲这些光栅以保持整个光栅上的恒定大火角度,使有效区域增加了5-10%。

Lynx is one of four large-mission concept studies for NASA's 2020 Decadal survey. The design reference mission includes an X-ray grating spectrometer (XGS) based on critical-angle transmission (CAT) gratings. In the past we studied different grating sizes and arrangements using traditional flat CAT gratings with constant bar spacing. However, new technology development brings chirped gratings in reach. Using chirped gratings where the grating bar spacing varies over a grating allows us to fill the aperture with larger gratings because the chirp can compensate for some aberrations caused by the deviation of large flat gratings from the Rowland torus. This reduces the area blocked by grating support structures. Using larger gratings also carries potential cost savings. We use ray-tracing to study an XGS design with chirped grating and find that using chirped gratings of $80 * 160$ mm size allows us to reduce the number of gratings from a few thousand to a few hundred, while simultaneously increasing the effective area by 25% and keeping the resolving power constant. Bending those gratings to maintain a constant blaze angle over the entire grating increases the effective area by another 5-10%.

扫码加入交流群

加入微信交流群

微信交流群二维码

扫码加入学术交流群,获取更多资源