论文标题

控制费米水平固定在近地面INAS量子井中

Controlling Fermi level pinning in near-surface InAs quantum wells

论文作者

Strickland, William M., Hatefipour, Mehdi, Langone, Dylan, Farzaneh, S. M., Shabani, Javad

论文摘要

杂交超导体 - 触发器异质结构是基于介质和拓扑超导性的量子设备的有前途的平台。在这些结构中,半导体必须与超导体紧邻并形成欧姆接触。这可以容纳在狭窄的带隙半导体(例如INAS)中,其中表面费米水平位于传导带附近。在这项工作中,我们研究了近地表INAS量子井的结构特性,并发现表面形态与低温转运密切相关,其中电子迁移率对基础渐变缓冲层的生长温度高度敏感。通过引入$ _ {0.81} $ al $ _ {0.19} $作为上限层,我们表明我们可以在$ _ {0.81} $ al $ _ $ _ {0.19} $的第一个纳米级固定中修改Surface Fermi级别固定。实验测量表明,与schrödinger-Poisson的电子密度计算有很强的一致性,这表明$ _ {0.81} $ a {0.81} $ ga $ _ {0.19} $ AS $ _ {0.81} $ _ {0.81} $ al {0.81} $ al $ _ {0.19} $ at surtible at surface to pin to pin to pin and pin n i ev \ si {309} {\ milli ev}分别在费米级别上方。

Hybrid superconductor-semiconductor heterostructures are a promising platform for quantum devices based on mesoscopic and topological superconductivity. In these structures, a semiconductor must be in close proximity to a superconductor and form an ohmic contact. This can be accommodated in narrow band gap semiconductors such as InAs, where the surface Fermi level is positioned close to the conduction band. In this work, we study the structural properties of near-surface InAs quantum wells and find that surface morphology is closely connected to low-temperature transport, where electron mobility is highly sensitive to the growth temperature of the underlying graded buffer layer. By introducing an In$_{0.81}$Al$_{0.19}$As capping layer, we show that we can modify the surface Fermi level pinning within the first nanometer of the In$_{0.81}$Al$_{0.19}$As thin film. Experimental measurements show a strong agreement with Schrödinger-Poisson calculations of the electron density, suggesting the conduction band energy of the In$_{0.81}$Ga$_{0.19}$As and In$_{0.81}$Al$_{0.19}$As surface is pinned to \SI{40}{\milli eV} and \SI{309}{\milli eV} above the Fermi level respectively.

扫码加入交流群

加入微信交流群

微信交流群二维码

扫码加入学术交流群,获取更多资源